Preparatory Measures Before (Initial) Start-Up; Unpacking; Inserting / Replacing The Batteries In The Power Module - Primedic HeartSave Operating Instructions Manual

3 Preparatory measures before (initial) start-up

3.1 Unpacking

After delivery, first of all check the packaging and the device for transport damage.
If you notice any damage to the device, immediately contact your transport company, dealer or
directly contact technical services at METRAX GmbH, stating the serial number and describing
the damage to the device.
Convince yourself that the scope of delivery is complete in accordance with the enclosed
delivery note.
Scope of delivery:
HeartSave AED Trainer
•
Power Module for HeartSave Trainer DD/AS
•
SD-Card
•
Operating instructions
•
SavePads Training Electrodes ( 5 Pair)
•
SavePads Training Cable
•
Remote Control Trainer DD/AS/ONE
•

3.2 Inserting / Replacing the Batteries in the Power Module

The PRIMEDIC ™ Heart Save AED Trainer can be used with commercially available alkaline
batteries or AA batteries.
Before the first use of the PRIMEDIC ™ Heart Save AED Trainer you must first insert the
batteries / rechargeable batteries in the battery compartment.
Fig. 9: Power Module, Closed
The lid of the power module is closed by three Phillips screws (1, 2, 3).
METRAX GmbH
Preparatory measures before (initial) start-up
23560 HeartSave AED Trainer / GB / B02 11 / 24