Preparatory Measures Before (First) Operation; Unpacking; Inserting / Changing The Savecard; Inserting The Savecard - Primedic DefiMonitor XD Series Operating Manual

Operating Manual
5
5.1
5.2
5.2.1
24

Preparatory Measures Before (First) Operation

Unpacking

After delivery, check the packing and the device for any damage during transport.
In case you determine any damage to the device, contact your shipper, dealer or even
the technical service of METRAX GmbH immediately. Give your serial number and
describe the damage to the device.
Do not operate the device if any damage is detected. This can be physically danger-
ous.
Check the accompanying delivery note and make sure that all the equipment has
been delivered.
Dispose off the packaging material in a non-polluting manner.

Inserting / Changing The SaveCard

Fig. 14 PRIMEDIC™ DefiMonitor – SaveCard
1 SaveCard release button
2 SaveCard
3 Cover

Inserting the SaveCard

In order to insert the SaveCard, it is necessary to first disconnect the accumulator!
Before switching on the device for the first time, open the compartment by pushing
the cover in the towards the power supply compartment. Afterwards, insert the
SaveCard in the slot provided for it. Push the SaveCard into the slot as much as
needed until button (1) will jut out.
Put in the power module now.
DefiMonitor XD
1
2
3
21324 / 09.05 / 02 / GB