BodyCraft SW-95.0202 Assembly And Operating Instructions Manual page 22

Step 7: Assembly of the Cable Arm Cable (5410mm)
࣑ ATTENTION
During assembly, always place the cables over or under the pulleys and only then mount the
covers. It is not always possible to pass the cables through afterwards!
Mount one pulley and the pulley guide bracket (24) to the cable arm assembly (20)[FIG2 & FIG3].
Ensure that the pulley guide bracket does not interfere with the cable movement when tightened.
Pass the cable (81) around the pulley on the base frame (1) [FIG4] and up and over the pulley in the
single pulley block (27) [FIG5].
22
X-Press Pro