For your safety and benefit, please read this entire manual. Please keep the manual in a convenient place for quick reference when needed. Bodycraft offers a complete array of high quality fitness equipment. Please refer to our web site at www.bodycraft.com to view more ways to enhance your lifestyle.
Page 4
SPR‐CT Sta�onary Seat Saddle (23) Pedals (116) Right Dual Ac�on Handlbar Le� Dual Seat Saddle (114R) Computer Ac�on Post (32) Console (9) Handlbar (114L) Fro nt Stabilizer (7) Rear Stabilizer (2) Le� Pedal Right Pedal (76L) (76R) Lock Levers (14 and 21) NOTE: Some or all of the Lock Levers may be pre installed.
Step 1 Front & Rear Stabilizer 1. Attach the REAR STABILIZER (2) to the MAIN FRAME (1) using two M10 x 30mm Bolts (3) and two M10 Washer s (4) as shown in STEP 1,1. 2. Attach the FRONT STABILIZER (7) to the MAIN FRAME (1) using two M10 x 30mm Bolts (3) and two Washers (4) as shown in STEP 1,2.
Page 7
Step 3 Assemble Computer Console 1. Remove the four pre-installed SCREWS (8) from the COMPUTER CONSOLE (9). Then plug the console wire harness (92) into the COMPUTER CONSOLE (9). 2. Mount the COMPUTER CONSOLE (9) to the HANDLE POST (16) using the four previously remove SCREWS (8).
Page 8
Step 5 & 6 Assemble Right Dual Ac�on Handlebar 1. Remove the pre-installed LOCK NUT (66) and DUST COVER (69) from Main Frame Pivot, STEP 5, and remove NUT (90) and WASHER (119) from 121R, STEP 6. Simultaneously assemble the DUAL ACTION RIGHT HANDLEBAR (114R) onto the MAIN FRAME (1) pivot shown in STEP 5, and RIGHT LINK PLATE (121R) onto (114R) shown in STEP 6.
Page 11
Adjus�ng the Resistance The level of resistance of the magne�c brake can be adjusted by moving the ADJUSTMENT LEVER. PUSH the LEVER forward to increase resistance and PULL the LEVER back to decrease resistance. How to make adjustments to your Indoor Cycle The SEAT SADDLE and HANDLEBAR can be adjusted ver�cally.
Daily Maintenance Checklist The life of the bike will be determined by how consistent maintenance is performed. Wipe down the bike at the end of each workout/class to help prevent rust and corrosion. Do not use abrasives or petroleum based cleaning products. What parts of the bike to Wipe Down: Wipe down all areas where perspira�on can se�le using an absorbent cloth.