Table of Contents
Advertisement
Step 2:
Assembly of the Main Frame and Leg Press Support
1.
Attach the main frame (202) to the base stabilizer (201) with two bolts (227), four washers (236),
one connector steel plate (207) and two nuts (238).
2.
Attach the plug (219) to the leg press support (203).
3.
Insert the 25mm axle (208) into the leg press support (203), then attach the leg press support
(203) to the main frame (202) with two collars (210) [inside the brackets on the main frame],
two bolts (228) and two washers (236). Tighten the bolts (228) and cap with two end caps (240).
4.
Insert the 3/4" axle (209) into the upper hole of the leg press support (203), then attach the foot
plate (206) to the leg press support (203) with two bolts (228) and two washers (236). Tighten
the bolts (228) and cap with two end caps (240).
5.
Attach two non slips (212) to the foot plate (206).
236
227
201
236
227
207
202
240
212
212
219
236
228
240
209
238
236
210
208
240
228
236
236
228
240
228
236
206
203
210
27
Advertisement
Table of Contents
