Related Manuals for BodyCraft 3D Smith Rack The Jones
Summary of Contents for BodyCraft 3D Smith Rack The Jones
- Page 1 Assembly Instructions ~ 90 Min. 174 kg L 107 | W 139 | H 211 SWJONES.01.01 Art. No. SW-JONES 3D Smith Rack The Jones...
- Page 2 The Jones...
-
Page 3: Table Of Contents
Content GENERAL INFORMATION Technical Data Personal Safety Set-Up Place ASSEMBLY General Instructions Scope of Delivery Assembly STORAGE AND TRANSPORT General Instructions TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions Faults and Fault Diagnosis Maintenance and Inspection Calendar DISPOSAL RECOMMENDED ACCESSORIES ORDERING SPARE PARTS Serial Number and Model Name Parts List Exploded Drawing... - Page 4 The Jones...
- Page 5 Germany European VAT Number: DE813211547 Disclaimer BodyCraft® is a registered brand of the company Fitness Authority Industrial Co., LTD. All rights reserved. Any use of this trademark without the explicit written permission of Fitness Authority Industrial Co., LTD is prohibited.
- Page 6 ABOUT THIS MANUAL Please carefully read the entire manual before installation and first use. The manual will help you to quickly set up the system and explains how to safely use it. Make sure that all persons exercising with the equipment (especially children and persons with physical, sensory, mental or motor disabilities) are informed about this manual and its contents in advance.
-
Page 7: General Information
GENERAL INFORMATION Technical Data Weight and Dimensions Packaging dimensions (L x W x H) and article weight (gross, incl. packaging) approx.: Box 1: 211 cm x 27 cm x 12 cm 66 kg Box 2: 155 cm x 26 cm x 12 cm 38.4 kg Box 3: 111 cm x 43 cm x 19 cm... -
Page 8: Personal Safety
Personal Safety DANGER ⚠ Before you start using the equipment, you should consult your physician that this type of exercise is suitable for you from a health perspective. Particularly affected are persons who: have a hereditary disposition to high blood pressure or heart disease, are over the age of 45, smoke, have high cholesterol values, are overweight and/or have not exercised regularly in the past year. -
Page 9: Set-Up Place
Set-Up Place WARNING ⚠ Do not place the equipment in main corridors or escape routes. ⚠ CAUTION Choose a location in which to place the equipment such that there is enough free space/ clearance to the front, the rear and to the sides of the equipment. The training room should be well ventilated during training and not be exposed to any draughts. -
Page 10: Assembly
ASSEMBLY General Instructions ⚠ DANGER Do not leave any tools, packaging materials such as foils or small parts lying around, as otherwise there is a danger of suffocation for children. Keep children away from the equipment during assembly. ⚠ WARNING Pay attention to the instructions attached to the equipment in order to reduce the risk of injuries. - Page 11 (1L/1R) (2L/2R) (3) Upright frame Base frame Top frame (4x) (4) Base connector (5) Top bearing (2x) housing connect (6) Chin up (7) Rear (8) Logo panel top frame (2x) (9L) Left bar rack (10R) Right bar rack (11) Rack holder (2x) (12) Guide rod (20) Vertical...
-
Page 12: Assembly
Assembly Before assembly, take a close look at the individual assembly steps shown and carry out the assembly in the order given. NOTICE First loosely screw all parts together and check that they fit properly. Tighten the screws using the tool only when you are instructed to do so. If you have difficulty recognising the graphics, we recommend that you open and/or download the PDF instructions stored in the webshop on your end device (e.g. - Page 14 Step 2: Assembly of the Guide Rods, Rack Holders and Top Frames Loosen the two 5/16” x 1/4” set screws (49) on the left base bearing housing (15L). Insert one guide rod (12) into the round receptor of the left base bearing housing (15L). Slide one safety spotter (22), one 1”...
- Page 16 Step 3: Assembly of the Chin Up Bar, Rear Top Frame and Logo Panels Attach the chin up bar (6) together with the logo panels (8) to the top frames (2L & 2R) and upright frames (3) with four 3/8”x4” hex bolts (42), eight 3/8” washers (51) and four 3/8” nylon nuts (55) [front].
- Page 17 Step 4: Assembly of the Weight Bar Attach the weight bar (19) to the vertical bearing housings (20) with a total of eight 3/8”x1-1/4” hex bolts (45), 16 3/8” washers (51) and eight 3/8” nylon nuts (55). Attach one spring clip (33) to each end of the weight bar (19). Attach the top bearing housing connector (5) to the left and right top bearing housings (17L &...
-
Page 18: Storage And Transport
STORAGE AND TRANSPORT General Instructions ⚠ WARNING The storage location should be chosen so that improper use by third parties or children can be prevented. If your equipment does not have transportation wheels, the equipment must be disassembled before transportation. ࣑... -
Page 19: Troubleshooting, Care And Maintenance
TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions ⚠ WARNING Do not make any improper changes to the equipment. CAUTION ⚠ Damaged or worn components may affect your safety and the life of the equipment. Therefore, immediately replace damaged or worn components. In such a case, contact the contract partner. -
Page 20: Maintenance And Inspection Calendar
Maintenance and Inspection Calendar To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!) after each training session. The following routine tasks must be performed at the specified intervals: Part Weekly Monthly Quarterly Screw connections Slide rails/Guide rods Legend: C = clean;... -
Page 21: Recommended Accessories
RECOMMENDED ACCESSORIES To make your training experience even more efficient and pleasant, we recommend that you add suiting accessories to your fitness equipment. For training equipment like smith machines, weight benches or racks this could for example be a floor mat, which makes your fitness equipment stand more securely and also protects the floor from sweat but it could be also additional weights, handles, foot straps for leg exercises or triceps ropes. -
Page 22: Ordering Spare Parts
The serial number of your equipment is unique. It's located on a white sticker. The exact position of this sticker is shown in the following illustration. Enter the serial number in the appropriate field. Serial number: Brand / Category: BodyCraft / multi gym Model Name: 3D Smith Rack The Jones Article Number: SW-JONES The Jones... -
Page 23: Parts List
Parts List Name Qty. BASE FRAME L & R TOP FRAME L & R UPRIGHT FRAME BASE CONNECTOR TOP BEARING HOUSING CONNECT CHIN UP BAR REAR TOP FRAME LOGO PANEL LEFT BAR RACK RIGHT BAR RACK RACK HOLDER VERTICAL GUIDE ROD BASE GUIDE ROD (pre-assembled in Base Frame) TOP GUIDE ROD (pre-assembled in Base Frame) LEFT BASE BEARING HOUSING (pre-assembled in Base Frame) - Page 24 RUBBER STOPPER (pre-assembled in Base Frame) POP PIN (pre-assembled in Base Frame) 25mm BEARING (pre-assembled in Base Frame) 25mm BEARING (pre-assembled in Vert., Top Bearing Housings) 30mm BEARING (pre-assembled in Base Frame) 1/2" X 4" HEX BOLT 1/2" X 3-1/4" HEX BOLT 1/2"...
-
Page 25: Exploded Drawing
Exploded Drawing... -
Page 26: Warranty
WARRANTY Training equipment from BodyCraft® is subject to strict quality control. However, if a fitness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline. - Page 27 Warranty Conditions For the warranty to be valid, the following steps must be taken: Please contact our customer service by email or phone. If the product under warranty has to be sent in for repair, the seller bears costs. After expiry of the warranty, the buyer bears the costs of transport and insurance.
-
Page 28: Contact
CONTACT TECHNIK TEKNIK OG SERVICE TECHNIQUE & SERVICE �� �� �� +49 4621 4210-900 80 90 16 50 +33 (0) 172 770033 +49 4621 4210-945 +49 4621 4210-933 �� +49 4621 4210-698 �� �� info@fitshop.dk service-france@fitshop.fr �� technik@sport-tiedje.de �� �� Åbningstider kan findes på... - Page 29 LIVE FITNESS WEBSHOP AND SOCIAL MEDIA Sport-Tiedje is Europe’s largest specialist store www.sport-tiedje.co.uk for home fitness equipment with currently over www.sport-tiedje.de/blog 70 stores and one of the world’s most renowned online mail order companies for fitness equipment. Private customers order via the 25 www.facebook.com/SportTiedje web shops in the respective national language or have their desired equpiment assembled on...
- Page 30 Notes The Jones...
- Page 32 3D Smith Rack The Jones...