BodyCraft Multigym X4 Assembly And Operating Instruction
  1. Manuals
  2. Brands
  3. BodyCraft Manuals
  4. Fitness Equipment
  5. Multigym X4
  6. Assembly and operating instruction

BodyCraft Multigym X4 Assembly And Operating Instruction

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Assembly and Operating Instructions
max. 150 kg
~ 400 Min.
689 kg
L 281 | B 223 | H 212
SW95X4.01.02
Art. No. SW-95.X4
TF-
Multigym X4

Advertisement

Table of Contents
loading

Related Manuals for BodyCraft Multigym X4

Summary of Contents for BodyCraft Multigym X4

  • Page 1 Assembly and Operating Instructions max. 150 kg ~ 400 Min. 689 kg L 281 | B 223 | H 212 SW95X4.01.02 Art. No. SW-95.X4 Multigym X4...

  • Page 3: Table Of Contents

    Content GENERAL INFORMATION Technical Data Personal Safety Set-Up Place ASSEMBLY General Instructions Scope of Delivery Assembly STORAGE AND TRANSPORT General Instructions TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions Faults and Fault Diagnosis Maintenance and Inspection Calendar DISPOSAL RECOMMENDED ACCESSORIES ORDERING SPARE PARTS Serial Number and Model Name Parts List Exploded Drawing...
  • Page 5 Germany European VAT Number: DE813211547 Disclaimer BodyCraft® is a registered brand of the company Fitness Authority Industrial Co., LTD. All rights reserved. Any use of this trademark without the explicit written permission of Fitness Authority Industrial Co., LTD is prohibited.
  • Page 6 ABOUT THIS MANUAL Please carefully read the entire manual before installation and first use. The manual will help you to quickly set up the system and explains how to safely use it. Make sure that all persons exercising with the equipment (especially children and persons with physical, sensory, mental or motor disabilities) are informed about this manual and its contents in advance.

  • Page 7: General Information

    GENERAL INFORMATION Technical Data Weight and Dimensions Packaging dimensions (L x W x H) and weight (gross, incl. packaging) approx.: Box 1 ca.: 205 cm x 53 cm x 24 cm 62.5 kg Box 2 ca.: 53 cm x 158 cm x 24 cm 52.2 kg Box 3 ca.: 208 cm x 30 cm x 17 cm...

  • Page 8: Personal Safety

    Personal Safety DANGER ⚠ Before you start using the equipment, you should consult your physician that this type of exercise is suitable for you from a health perspective. Particularly affected are persons who: have a hereditary disposition to high blood pressure or heart disease, are over the age of 45, smoke, have high cholesterol values, are overweight and/or have not exercised regularly in the past year.

  • Page 9: Set-Up Place

    Set-Up Place WARNING ⚠ Do not place the equipment in main corridors or escape routes. ⚠ CAUTION Choose a location in which to place the equipment such that there is enough free space/ clearance to the front, the rear and to the sides of the equipment. The training room should be well ventilated during training and not be exposed to any draughts.

  • Page 10: Assembly

    ASSEMBLY General Instructions ⚠ DANGER Do not leave any tools, packaging materials such as foils or small parts lying around, as otherwise there is a danger of suffocation for children. Keep children away from the equipment during assembly. ⚠ WARNING Pay attention to the instructions attached to the equipment in order to reduce the risk of injuries.

  • Page 11: Scope Of Delivery

    Scope of Delivery The scope of delivery consist of the following parts. At the beginning, check whether all parts and tools belonging to the device are included in the scope of delivery and whether damage has occurred. In the event of complaints, the contractual partner must be contacted directly. CAUTION ⚠...

  • Page 16: Assembly

    Assembly Before assembly, take a close look at the individual assembly steps shown and carry out the assembly in the order given. NOTICE First loosely screw all parts together and check that they fit properly. Tighten the screws using the tool only when you are instructed to do so. If you have difficulty recognising the graphics, we recommend that you open and/or download the PDF instructions stored in the webshop on your end device (e.g.
  • Page 18 Step 2: Assembly of the Top Frame Mount the pre-installed top frame bearing (10) to the front and rear uprights (4 & 3) with two bolts (122), four washers (146) and two nuts (153) each. Mount the lat bar holder (11) to the pre-installed top frame bearing (10) with two bolts (128), four washers (147) and two nuts (154).
  • Page 20 Step 3: Assembly of the Seat and Back Pads Mount the front seat frame (14) to the front upright (4) with two bolts (128), four washers (147) and two nuts (154). Mount the front seat frame (14) to the base frame (1) with one bolt (126), two washers (147) and one nut (154).
  • Page 21 19. Slide two metal hinges (24) onto the axle on top of the seat back adjuster (23). 20. Mount the back pad (102) to the metal hinges (24) with two bolts (134) and two washers (147). 21. Mount the rear seat frame (20), the rear chrome seat adjuster (21), seat back adjuster (22) and the pads the same way as the front seat.
  • Page 22 Step 4: Assembly of the Bench Press Mount the press arm selector (12) to the top frame with pre-installed bearing (10) by aligning the holes and inserting one pivot axle (33). Lock it into place with the pre-installed set screw. Mount the press arm (15) to the press arm selector (12) by aligning the holes and inserting one pivot axle (33).
  • Page 23 Step 5: Assembly of the Ab Crunch Cable ࣑ ATTENTION The removable end of the ab crunch cable must be screwed in completely after installing the ab crunch cable. Pass the steel cable end (Fig. 1) to the bracket welded on the leg extension arm (20). Then pass the threaded end of the ab crunch cable (108) through and under the two pulleys on the base frame (1) (Fig.
  • Page 24 Step 6: Assembly of the Cable Arm Connecting Cable Hook the cable arm connecting cable (110) into the bracket mounted on the base frame (1) (Fig. 1) and pass the cable up and over the pulley in the adjustable pulley block (30) (Fig. 2) and screw the threaded cable end into the single pulley block (Fig.
  • Page 25 Step 7: Assembly of the Press Arm Cable NOTICE The cable and pulleys must be assembled simultaneously. Attach the steel ball end of the press cable (107) to the pre-installed bracket on the front upright (4) (Fig. 1). Pass the cable over and around the left side pulley (from the seat) on the press arm selector (12), under and around the pulley on the front upright (4), over and around the right side pulley on the press arm selector (12) (Fig.
  • Page 26 Step 8: Assembly of the Top Cable Pass the threaded end of the top cable (109) over the pulley on the top frame (10) (Fig. 1), through the slot on the rear upright (3), over the pulley on the top frame (10) (Fig. 2), under and around the top pulley on the pulley block (30) (Fig.
  • Page 27 Step 9: Assembly of the Cable Arm Cable Attach the cable arm cable (111) to the pulley on the single pulley block (25) (Fig. 5). Attach the pulleys and pulley guide brackets (26) to the cable arm assembly (27) (Fig. 3 & 4). Ensure that the pulley guide brackets do not interfere with the cable movement when tightened.
  • Page 28 Step 10: Assembly of the Leg Press System Mount the leg press weight base connector (207) and the long leg press connector (205) to the leg press main frame (202) with two bolts (127), four washers (147) and two nuts (154) each. Mount the base stabilizer (201) to the leg press main frame (202) with two bolts (123), four washers (146) and two nuts (153).
  • Page 29 11. Mount the right and left leg handles (203 & 204) with the angle facing upwards to the leg press main frame (202) with two bolts (128), four washers (147) and two nuts (154). 12. Mount the seat pad (105) to the leg press main frame (202) with two bolts (134), one bolt (129) and three washers (147).
  • Page 30 Step 11: Assembly of the Leg Press Cable Screw in at least seven threads of the leg press cable (213R) into the top of the selector rod (94) (Fig. 1). Pass the cable over the pulley on the top guide rod retainer (208) (Fig. 2), down and under the pulley on the weight stack base (207) (Fig.
  • Page 32 Step 12: Assembly of the Cable Column Base Frame Attach three plugs (64) to the cable column weight stack base (301B). Mount the cable column weight stack base (301B) to the base frame (1) with two bolts (169) and two washers (146). Mount the front stabilizer (303B) to the weight stack base (301B) with two bolts (318), four washers (147) and two nuts (154).
  • Page 34 Step 13: Assembly of the Cable Column Cable Insert the ball end of the cable column cable (314) in front of the right side cable height adjuster (304). Mount two pulleys (Fig. 1) and pass the cable up to the top guide rod retainer (302) and over the mounted pulley (Fig.
  • Page 36 Step 14: Assembly of the Weight Stack Shrouds and Poster Plates Mount the weight stack shrouds (35) to the weight stack bases (5 & 6) with four bolts (135) and four washers (148) each. NOTICE Tighten the bolts loosely at first in order to align the holes easily. Mount the right and left poster plates (38R &...
  • Page 37 Step 15: Assembly of the Leg Press Shrouds Mount the weight stack shrouds (35) to the weight base connector (207) and the weight stack bases (208) with four bolts (135) and four washers (148) each. NOTICE Tighten the bolts loosely at first in order to align the holes easily. Attach two trims for weight shroud (106) to each of the weight stack shroud (35).
  • Page 38 Step 16: Assembly of the Cable Column Weight Stack Shrouds Mount the weight stack shrouds (35) to the top guide rod retainer (302) and the weight stack base (301B) with four bolts (135) and four washers (148) each. NOTICE Tighten the bolts loosely at first in order to align the holes easily. Attach two trims (106) to each of the weight stack shrouds (35).

  • Page 39: Storage And Transport

    STORAGE AND TRANSPORT General Instructions ⚠ WARNING The storage location should be chosen so that improper use by third parties or children can be prevented. If your equipment does not have transportation wheels, the equipment must be disassembled before transportation. ࣑...

  • Page 40: Troubleshooting, Care And Maintenance

    TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions ⚠ WARNING Do not make any improper changes to the equipment. CAUTION ⚠ Damaged or worn components may affect your safety and the life of the equipment. Therefore, immediately replace damaged or worn components. In such a case, contact the contract partner.

  • Page 41: Maintenance And Inspection Calendar

    Maintenance and Inspection Calendar To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!) after each training session. The following routine tasks must be performed at the specified intervals: Part Weekly Monthly Quarterly Cables Screw connections Pulleys and cable routing...

  • Page 42: Recommended Accessories

    RECOMMENDED ACCESSORIES To make your training experience even more efficient and pleasant, we recommend that you add suiting accessories to your fitness equipment. This could be a floor mat, for example, which makes your fitness equipment stand more securely and also protects the floor from falling sweat, but it could also be additional handrails on some treadmills or silicone spray to keep moving parts in good shape.

  • Page 43: Ordering Spare Parts

    The serial number of your equipment is unique. It's located on a white sticker. The exact position of this sticker is shown in the following illustration. Enter the serial number in the appropriate field. Serial number: Brand / Category: BodyCraft / multi gym Model Name: Article Number: SW-95.X4...

  • Page 44: Parts List

    Parts List Name Qty. 3 st. 4 st. Total BASE FRAME BASE STABILIZER REAR CABLE ARM UPRIGHT FRONT PRESS ARM UPRIGHT WEIGHT STACK BASE TOP GUIDE ROD RETAINER FRONT STABILIZER CABLE ARM CONNECTOR HAND HOLDER TOP FRAME (bearing pre-installed) LAT BAR HOLDER PRESS ARM SELECTOR GUIDE ROD FRONT SEAT FRAME...
  • Page 45 20mm PIVOT AXLE CABLE ARM COLLAR WEIGHT STACK SHROUD LAT BAR LOW ROW BAR RIGHT POSTER PLATE LEFT POSTER PLATE LEG EXTENSION AXLE 608ZB BEARING STEEL SPACER (all pre-installed) AXLE COLLAR (all pre-installed) BEARING BASIN (all pre-installed) BEARING (all pre-installed) BEARING COVER (all pre-installed) PULLEY GUIDE BRACKET RIGHT LEG EXTENSION ARM...
  • Page 46 SHORTER POP PIN(one pcs. pre-installed) 28.6mm STEEL BUSHING(all pre-installed) 25.4mm STEEL BUSHING(all pre-installed) 1/2" X 1-1/8" BEARING(all pre-installed) LONGER POP PIN(one pcs. pre-installed) CLUTCH LEVER OF CABLE ARM Set SPRING KNOB SELECTOR PIN L PIN 114mm PULLEY(four pcs. pre-installed) = 36 SMALL PULLEY IN SWIVEL ARM(all pre-installed) RUBBER DONUT ADJUSTABLE STOPPER(all pre-installed)
  • Page 47 AB CRUNCH CABLE (5770mm) TOP CABLE (2925mm) CABLE ARM CONNECTING CABLE (1780mm) CABLE ARM CABLE(pre-installed) (5320mm) REMOVABLE END CABLE ARM CABLE(pre-installed) CLUTCH CABLE (422mm) 5/8" X 6-1/2" HEX BOLT 1/2" X 4-1/4" HEX BOLT 1/2" X 3"-1/4 HEX BOLT 1/2" X 1-3/4" HEX BOLT 3/8"...
  • Page 48 5/16"SPRING WASHER(pre-installed) 24mm NYLON NUT(all pre-installed) 5/8" NYLON NUT 1/2" NYLON NUT(four pcs. pre-installed) = 16 3/8" NYLON NUT(four pcs. pre-installed) = 76 5/16'' NYLON NUT (all pre-installed) 3/8''X1'' INNER HEX SCREW 5/16''X1-1/4'' SUNKEN HEAD SCREW 5/16'' NUT 1-1/4'' HEAD GRIP 1'' T SHAPE END PLUG HOOK PLATE COLLAR...
  • Page 49 BACK PAD ADJUSTER LEG PRESS CABLE (6630mm) 213R LEG PRESS CABLE (6170mm) STEEL TUBE (all pre-installed) 51102 BEARING (all pre-installed) BEARING COVER (all pre-installed) BEARING BASIN (all pre-installed) 1008 ''C'' PIN (all pre-installed) WEIGHT STACK BASE TOP GUIDE ROD RETAINER FRONT STABILIZER CABLE HEIGHT ADJUSTER SWIVEL PULLEY BRACKET...

  • Page 50: Exploded Drawing

    Exploded Drawing...

  • Page 53: Warranty

    WARRANTY Training equipment from BodyCraft® is subject to strict quality control. However, if a fitness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline.
  • Page 54 Warranty Conditions For the warranty to be valid, the following steps must be taken: Please contact our customer service by email or phone. If the product under warranty has to be sent in for repair, the seller bears costs. After expiry of the warranty, the buyer bears the costs of transport and insurance.

  • Page 55: Contact

    CONTACT TECHNICAL SUPPORT TECHNICAL SUPPORT & SERVICE TECHNICAL SUPPORT & SERVICE �� �� �� +49 4621 4210-900 80 90 16 50 +33 (0) 172 770033 +49 4621 4210-945 +49 4621 4210-933 �� +49 4621 4210-698 �� �� info@fitshop.dk service-france@fitshop.fr �� technik@sport-tiedje.de ��...
  • Page 56 LIVE FITNESS WEBSHOP AND SOCIAL MEDIA Sport-Tiedje is Europe’s largest specialist store www.sport-tiedje.co.uk for home fitness equipment with currently over www.sport-tiedje.de/blog 70 stores and one of the world’s most renowned online mail order companies for fitness equipment. Private customers order via the 25 www.facebook.com/SportTiedje web shops in the respective national language or have their desired equpiment assembled on...
  • Page 57 Notes...
  • Page 58 Notes...
  • Page 60 Multi-gym X4...

This manual is also suitable for:

Sw-95.x4

Table of Contents