Otto Bock SiOCX TF 7T450-1 Instructions For Use Manual page 9

sondere durch unsachgemäße Verwendung oder unerlaubte Veränderung des Produkts verur­
sacht werden, haftet der Hersteller nicht.
1 Product description
INFORMATION
Date of last update: 2020-07-28
Please read this document carefully before using the product and observe the safety
►
notices.
Instruct the user in the safe use of the product.
►
Please contact the manufacturer if you have questions about the product or in case of prob­
►
lems.
Report each serious incident in connection with the product, in particular a worsening of the
►
state of health, to the manufacturer and to the relevant authority in your country.
Please keep this document for your records.
►
1.1 Construction and Function
SiOCX inner sockets are made of HTV silicone and, depending on the version, also a carbon
prepreg outer socket with adapter. Depending on the version, additional silicone gel pads and
flexible socket sections can be integrated as options to provide pressure relief in sensitive or bony
areas. The inner sockets are individually fabricated according to the patient data. For the SiOCX-
TF with closed outer socket, a fitting step is integrated into the process for better adaptation to
the patient. For this purpose, the definitive inner socket is supplied with a ThermoLyn check sock­
et without adapter. With the check socket, the shape and socket trim line can be changed and the
adapter position can be set.
1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular connectors. Func­
tionality with components of other manufacturers that have compatible modular connectors has
not been tested.
The SiOCX TF Prox 7T452=1 is suitable for various suspension systems such as shuttle locks
and KISS pull-in systems. The SiOCX TF Seal 7T452=2 is especially well suited for elevated
vacuum sockets in combination with the ProSeal SIL liner.
2 Intended use
2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fittings.
2.2 Area of application
The product must be used in TF prostheses only.
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
English
9