Otto Bock SiOCX TF 7T450-1 Instructions For Use Manual page 13

NOTICE
Use of improper cleaning agents
Damage to the product due to use of improper cleaning agents
► Only clean the product with the approved cleaning agents.
Required cleaning agents: pH neutral soap (e.g. 453H10 Derma Clean), scratch and lint-
>
free cloth
1) Clean the product with a cloth using fresh water and a pH neutral soap.
Make sure no liquid gets onto the other prosthesis components and between the inner and
outer sockets.
2) Remove soap residue with a cloth using fresh water.
3) Dry the product with a lint-free cloth and allow it to fully air dry.
8 Maintenance
► Arrange regular maintenance intervals with the patient depending on the level of use.
► Conduct half-yearly safety inspections.
► During the standard inspection of the prosthesis components, also inspect the product.
Maintenance steps
Required materials: Allen wrench 2 mm, 646F297* isopropyl alcohol
>
1) Check the prosthetic socket for damage.
2) If present: Loosen the valve closure.
3) Mark the matching screws and insert nuts.
4) Remove the screws with the Allen wrench.
5) Take out the silicone socket.
6) If present: Remove the electrodes from the silicone socket.
7) If present: Clean the myo-contact surfaces with isopropyl alcohol.
8) Clean the prosthetic socket (see Page 12).
9) Optional: Boil the silicone socket.
10) Reassemble the prosthetic socket.
9 Disposal
In some jurisdictions it is not permissible to dispose of the product with unsorted household
waste. Improper disposal can be harmful to health and the environment. Observe the information
provided by the responsible authorities in your country regarding return, collection and disposal
procedures.
10 Legal information
All legal conditions are subject to the respective national laws of the country of use and may vary
accordingly.
10.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip­
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregarding the information in this document, particularly due to improper
use or unauthorised modification of the product.
1 Description du produit
INFORMATION
Date de la dernière mise à jour : 2020-07-28
Français
13