Lan Settings - KVH Industries TracPhone V3 HTS User Manual

TracPhone V3-HTS User's Guide
Network Configuration

LAN Settings

78
By default, the High-speed LAN has a gateway of 192.168.5.1 and
assigns IP addresses in the 192.168.5.50-150 range. If this configuration
conflicts with an existing onboard network, you may change the
settings at the TracPhone V3-HTS web interface (see below).
Important!
The default LAN settings work well for most installations. Do not
change these settings unless absolutely necessary.
NOTE: If the optional CommBox software is enabled, the Network Settings
page of the ICM will not contain any configurable fields.
To change the ICM's High-speed LAN settings, follow these steps:
1. At the TracPhone V3-HTS web interface, click the Settings tab.
Then click Network Settings.
2. In LAN Settings, click Edit.
3. If the Login window appears, log in with the Administrator
password.
4. Modify the IP Address, Subnet Mask, and DHCP Mode
settings as necessary.
5. Click Save.
6. At the confirmation message, click Save.
Figure 7-20 LAN Settings