KVH Industries TracPhone V3 HTS User Manual page 149

Hide thumbs Also See for TracPhone V3 HTS:
Table of Contents

Advertisement

TracPhone V3-HTS User's Guide
Glossary
Router
RSSI
RX
SIP
Skew
SNR
Spread Spectrum
SSID
Straight-through Cable
162
Device that connects multiple IP networks. For each data packet it
receives that is destined for another IP network, determines the best
path to reach its destination.
Receive Signal Strength Indicator. Indicates the strength of the
received satellite signal.
Receive.
Session Initiation Protocol. Protocol for routing VoIP calls.
Adjustment angle to orient an LNB with a linearly polarized satellite
signal.
Ratio of signal-level to background-noise in decibels, indicating the
general quality of a received signal.
A type of communication method by which the information signal
energy is spread over a frequency band much wider than the
minimum bandwidth required for transmitting the information. The
resulting low power level across the full bandwidth does not interfere
with neighboring satellites, so the width of the transmitted beam is not
as critical as it is with traditional VSAT antennas.
Service Set Identifier. Unique identifier shared by all computers and
devices on a single wireless network.
Cable in which the pins at one end match the pins at the other end.

Advertisement

Table of Contents
loading

Table of Contents