KVH Industries TracPhone V3 HTS User Manual page 102

Hide thumbs Also See for TracPhone V3 HTS:
Table of Contents

Advertisement

No.
Description
123
Error: The ICM's built-in modem is not responding to
status queries. Contact KVH.
124
Warning: The software update file you selected is not valid
for the TracPhone V3-HTS. Try a new update file.
127
Error: The antenna is not accepting the no-transmit zones
setup from the ICM. Contact KVH.
128
Warning: The software update failed. Retry updating the
software. If it fails again, check the power/data cable and
the wires on the back of the ICM.
129
Error: The ICM has lost internal communications of satellite
signal strength (RSSI) data. Contact KVH.
130
Error: The ICM is incompatible with the antenna' s LNB.
Either the ICM or the LNB is configured for HTS, while the
other is not. Contact KVH.
132
Error: The ICM has detected a SATADOM filesystem
corruption and is operating in Rescue Mode. Contact KVH.
200
Warning: The antenna is not receiving adequate DC power
from the ICM. Check the power/data cable and the wires
on the back of the ICM.
204
Error: The antenna's main board has lost RF
communications. Try updating the software (see
Updates" on page
206
Error: The antenna's azimuth motor or limit switch failed.
Contact KVH.
208
Error: The antenna's elevation motor or limit switch failed.
Contact KVH.
218
Error: The antenna's skew motor or limit switch failed.
Contact KVH.
219
Error: One of the antenna's gyros is out of calibration.
Contact KVH.
220
Warning: One of the antenna's gyros failed. Contact KVH.
221
Error: The system is not receiving any GPS data. Contact
KVH.
TracPhone V3-HTS User's Guide
133).
Troubleshooting
"Software
107

Advertisement

Table of Contents
loading

Table of Contents