KVH Industries TracPhone V3 HTS User Manual page 37

TracPhone V3-HTS User's Guide
No-Transmit Zones
34
Configure the No-Transmit Zone(s) at the Web Interface
1. At the TracPhone V3-HTS web interface, click the Settings tab.
Then click No-Transmit Zones.
2. Click Edit.
3. If the Login window appears, log in with the Administrator
password.
4. In No-Transmit Zone Ranges, make sure Enforce Zones is
selected.
Important!
When "Enforce Zones" is selected, the antenna will not transmit
whenever it points within one of your configured no-transmit zones. If
"Ignore Zones" is selected instead, the zones are disabled, allowing the
antenna to transmit in any direction without restriction.
5. Enter the azimuth range for Zone 1.
6. If you wish to set up a second no-transmit zone, enter the
azimuth range for Zone 2.
7. Click Save All Settings.
8. At the confirmation message, click Save.
Figure 4-4 Configuring No-Transmit Zones