Turning On The System - KVH Industries TracPhone V3 HTS User Manual

TracPhone V3-HTS User's Guide
Getting Started

Turning On the System

16
To turn on your TracPhone system, follow these steps:
CAUTION
The antenna transmits RF energy that is potentially harmful. Make
sure everyone stays more than 32 feet (10 m) away from the
antenna while it is in use. No hazard exists directly above the
antenna and anywhere below its mounting plane.
1. Make sure the antenna has a clear, unobstructed view of the
sky.
2. Make sure vessel AC power is applied to the ICM and your
computer(s).
3. Press the power button on the front of the ICM. The button's
light should illuminate blue.
Figure 2-1 Power Button
Power Button
4. Wait at least five minutes for system startup. Do not turn off
the ICM during this time.
5. Turn on your computer(s) that are connected to the network.
Once the antenna finds the service satellite and the ICM's
modem logs into the mini-VSAT Broadband service, all status
lights on the ICM should be lit green. If any lights are not lit
green, refer to "LED Indicators" on page
ICM
120.