Change Network Settings - KVH Industries TracVision HD7 Installation Manual

17

Change Network Settings

Once your PC or mobile device is connected to
the ACU's web interface, follow the steps below
to change certain network settings.
Changing Ethernet Settings
At the web interface, select the Settings tab. Then
choose Edit to modify the desired network
settings (see Figure 34).
NOTE: You can also change the Ethernet settings
through the View Enet Settings menu on the front of
the ACU (refer to "ACU Menu Structure" on
page 28).
Changing Wi-Fi Settings
If you are using the supplied wireless router,
follow the instructions below to make changes to
the router's default Wi-Fi network settings.
a. Connect a PC or mobile device to the wireless
router's default SSID network name
(Linksys<last 5 digits of the router's serial
number>).
b. Open the web browser and enter 192.168.1.1.
c. Login to the router's web interface and make
any necessary changes. Refer to the router's
documentation for details.
20
Figure 34 Ethernet Settings on the Web Interface
Select to Edit
Current
Settings