Disabling No-Transmit Zones - KVH Industries TracPhone V3 HTS User Manual

Disabling No-Transmit Zones

You can disable your programmed no-transmit zones to temporarily
remove all restrictions on transmissions. This function permits the
antenna to ignore the zones; it does not delete them from the system's
memory.
Disabling no-transmit zones allows the antenna to transmit in any
direction, even if the antenna is pointing in an area accessible to
passengers and crew. Make sure everyone stays the minimum safe
distance away from the antenna while it is in use (see
Hazard Area" on page
To disable the no-transmit zones, follow these steps:
1. At the TracPhone V3-HTS web interface, click the Settings tab.
Then click No-Transmit Zones.
2. Click Edit.
3. If the Login window appears, log in with the Administrator
password.
4. In No-Transmit Zone Ranges, click Ignore Zones.
5. Click Save All Settings.
6. At the confirmation message, click Ignore Zones.
Figure 4-5 Disabling No-Transmit Zones
CAUTION
6).
TracPhone V3-HTS User's Guide
No-Transmit Zones
"RF Radiation
35