KVH Industries TracPhone V3 HTS User Manual page 61

TracPhone V3-HTS User's Guide
Network Configuration
62
To select an ICM network configuration, follow these steps:
1. At the TracPhone V3-HTS web interface, click the Settings tab.
Then click Network Settings.
NOTE: You can also change the ICM's network configuration at the mini-
VSAT Manager (www.mykvh.com). Go to the ICM > Network
Configuration section of the Vessel Details page and select Configure
Network.
2. In Network Configuration, click Edit.
3. Select an option from the Configuration drop-down menu.
Then click Save.
Figure 7-2 Selecting a Network Configuration
4. At the confirmation message, click Save.
5. Follow the additional steps for your chosen configuration:
"Standard Configuration" on page 63
"Static IP Configuration" on page 65
"Access Control Configuration" on page 68
NOTE: Whenever you change the ICM's network configuration, its built-in
wireless access point (WAP) reverts to Off, its default setting.