Lan Settings On Icm - KVH Industries TracPhone V7-IP User Manual

LAN Settings on ICM

By default, the ICM has a gateway address of 192.168.5.1 and assigns
IP addresses in the 192.168.5.100-200 range (DHCP configurations
only). If this configuration conflicts with another onboard network,
you may change these settings.
Important!
The default LAN settings work well for most installations. Do not
change these settings unless absolutely necessary.
NOTE: If the optional CommBox software is enabled, or the ICM is
configured for Dual Dome-Secondary or Legacy mode, the Network Settings
page of the ICM will not contain any configurable fields. (See
Features" on page 89
"Physical Ethernet Port Configurations" on page 74
the ICM's configuration.)
To change the ICM's LAN settings, follow these steps:
1. At the TracPhone V7-IP web interface, click the Settings tab.
Then click Network Settings.
2. In LAN Settings, click Edit.
3. If the Login window appears, log in with the Administrator
password.
4. Modify the IP Address, Subnet Mask, and DHCP Mode
settings as necessary.
5. Click Save.
6. At the confirmation message, click Save.
for details on enabling the CommBox software. See
TracPhone V7-IP User's Guide
Network Configuration
"CommBox
for details on changing
71