KVH Industries TracPhone V3 HTS User Manual page 63

TracPhone V3-HTS User's Guide
Network Configuration
64
Figure 7-4 Standard Configuration Wiring Example
(High-speed LAN)
ICM
User Ethernet
1 2 3 4
High-speed LAN
Bridge Ops PC Officers PC
4. Make sure all computers are configured for DHCP addressing
(see "Configuring Computers for DHCP" on page
connected to the ICM (via Ethernet cables or Wi-Fi) will receive
IP addresses from the ICM via DHCP. The ICM serves as a
router.
NOTE: By default, the High-speed LAN has a gateway of 192.168.5.1 and
assigns IP addresses in the 192.168.5.50-150 range. If this configuration
conflicts with an existing onboard network, you may change the settings at
the TracPhone V3-HTS web interface (go to Settings > Network Settings).
See "LAN Settings" on page 78
Wi-Fi
Mobile
Devices
Mobile
Crew PC WAP Devices
for details.
72). Devices