KVH Industries TracPhone V3 HTS User Manual page 101

TracPhone V3-HTS User's Guide
Troubleshooting
106
No. Description
107 Warning: The ICM's internal temperature exceeds
acceptable limits. Try these steps:
• Listen for the cooling fan inside the ICM. If you don't
hear the fan, contact KVH.
• If you hear the cooling fan, turn off the system and allow
it to cool down. Then vacuum the ICM's vents (see
"Preventative Maintenance" on page
• If the problem persists, you might need to relocate the
unit to an area that provides better ventilation.
111 Warning: The ICM is unable to initialize its built-in wireless
access point (WAP). Contact KVH.
112 Warning: There is an internal fault in the ICM. Contact
KVH.
117 Error: There is an open circuit in the transmit (TX) RF cable.
Check the cable. If the cable is OK, the BUC might be faulty
– contact KVH.
118 Error: There is a short circuit in the transmit (TX) RF cable.
Check the cable. If the cable is OK, disconnect the cable
from the ICM and turn the ICM off, then back on. If the
error persists, there is an internal fault in the ICM. If the
error disappears, the BUC might be faulty. Contact KVH.
120 Warning: The internal temperature of the ICM's built-in
modem exceeds acceptable limits. Try these steps:
• Listen for the cooling fan inside the ICM. If you don't
hear the fan, contact KVH.
• If you hear the cooling fan, turn off the system and allow
it to cool down. Then vacuum the ICM's vents (see
"Preventative Maintenance" on page
• If the problem persists, you might need to relocate the
unit to an area that provides better ventilation.
121 Error: The ICM is not receiving satellite signal strength
(RSSI) data from its built-in modem. Try these steps:
• Turn the ICM off, then back on.
• Check the jumper cable.
• If the error persists, contact KVH.
122 Error: The ICM's built-in modem is not communicating.
Try these steps:
• Check the ICM jumper cable.
• Try turning the ICM off, then back on.
• If the error persists, contact KVH.
131).
131).