Configuring The Display Monitor - Planar DOME Md5/PCI Installation Manual

124
Configuring the Display Monitor
Your Md5/PCI board provides high display resolutions
and its monitors have unique requirements. Therefore,
you must configure the driver to specify which monitor
is attached to your Md5/PCI board.
When you first install the kit on your system, the
program automatically configures your DOME display
driver to support the monitors you specify. If you change
monitors after you install the kit, you can use a special
script called
configuration easily without reloading the kit.
set_dome_monitor
Chapter 4
setld
to change the driver