Unsigned Driver Cannot Be Loaded Message - Planar DOME Md5/PCI Installation Manual

Installing the Md5/PCI Board in a PC

Unsigned driver cannot be loaded message

If an
appears on the screen, set the
Policies\Microsoft\Windows NT\Driver Signing
key to allow installation of DOME drivers.
1. Select Start -> Settings -> Control Panel -> System.
The System Properties dialog box appears.
2. Click the Hardware tab, and then click Driver
Signing... in the Device Manager section.
3. Select either Ignore or Warn to allow installation of the
DOME driver and other unsigned drivers.
• If you select Ignore, the installation program
• If you select Warn, the installation displays the
unsigned driver cannot be loaded
ignores the lack of a valid Catalog file with a
digital signature.
message,
Digital Signature Not Found
prompts you to continue or cancel.
message
HKCU\Software\
, and
77