Installing The Pci Windows 95 Driver; To Install The Driver - Planar DOME Md5/PCI Installation Manual

8

Installing the PCI Windows 95 Driver

This procedure assumes that the Windows 95 operating
system is already installed on your system. If it is not, refer
to the Microsoft Windows 95 documentation.
Install the PCI Windows 95 driver before installing the
DOME board; otherwise, driver installation problems
may occur.

To install the driver

1. Insert the installation diskette in your computer's A
drive.
2. Double-click My Computer -> Drive A icon ->
Setup.exe .
The installation program prepares the installation files
and guides you through installation of the Md5/PCI
setup configuration files.
3. Follow the on-screen instructions.
4. When the automatic installation procedure is complete,
close the Floppy Drive A and My Computer folders.
5. Select Start –> Shut Down .
The Shut Down Windows dialog box appears.
6. Select Shut Down the Computer? and click Yes .
The Shut Down message appears.
7. Turn off the power to your computer.
8. Eject the diskette.
Chapter 2