Configuring Display Settings In Windows 95; To Set Display Properties - Planar DOME Md5/PCI Installation Manual

10
Configuring Display Settings in Windows 95
When the board and driver are installed and the system is
restarted, you can set the display properties.

To set display properties

1. Right-click the desktop, and select Properties ->
DOME tab.
The DOME tab appears.
2. Set the desired display properties, and click
Apply -> OK .
3. Click Start -> Shut Down... to restart your computer
and effect the changes.
The Shut Down Windows dialog box appears.
4. Select Restart the Computer, and click Yes.
Chapter 2