Server Settings - Kyocera ECOSYS PA6000 Series Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Server Settings

Set the server type when network authentication is enabled.
1
Display the screen.
1 [Menu] key > [ ] [ ] key > [User/Job Account] > [OK] key
NOTE
If the User Authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login User Name or Password, please contact your Administrator.
2 [ ] [ ] key > [User Login Set.] > [OK] key > [ ] [ ] key > [User Login] > [OK] key > [ ] [ ] key > 
[Netwk Auth. Set.] > [OK] key > [ ] [ ] key > [Server Type] > [OK] key
2
Configure the settings.
1 Select [NTLM], [Kerberos], or [Ext.] for the [Server Type], and select [OK] key.
When [NTLM], [Kerberos] is selected, you can configure multiple authentication servers.
2 Enter the host name (64 characters or less) for the Authentication Server and select the [OK] key.
When selecting [Ext.] as the server type, enter the port number.
3 Select the domain name for the Authentication Server, and select the [OK] key.
If the domain has not been set, select the number where "----------------" is displayed and select [Menu]. Select [Edit]
and select the [OK] key then enter the domain name (in 256 characters or less). Select the [OK] key and the domain
will be registered.
To edit or delete a domain name that has already been registered, select that domain name and select [Menu].
NOTE
• Up to 10 domain names can be registered.
• If the login user name and password are rejected, check the following settings.
- Network Authentication setting of the machine
- User property of the Authentication Server
- Date and time setting of the machine and the Authentication Server
9-11