Activating Applications - Kyocera 7056i Operation Manual

Operation on the Machine > Application

Activating Applications

1
2
3
4
Select [Yes].
Installation of the application begins. Depending on the application being installed, the
installation may take some time.
Once the installation ends, the original screen reappears.
NOTE
• To install another application, repeat steps 2-3 and 2-4.
• To remove the removable memory, select [Remove Memory] and wait until the
message "Removable Memory can be safely removed." appears. Then remove the
removable memory.
Display the screen.
[System Menu/Counter] key > [Application]
NOTE
If the user authentication screen appears, enter your login user name and login password
and select [Login]. For this, you need to login with administrator privileges. The factory
default login user name and login password are set as shown below.
Model Name
7056i
8056i
Activate the application.
1
Select the desired application > [Activate]
You can view detailed information on the selected application by selecting [Detail].
2
Enter the license key > [Official]
Some applications do not require you to enter a license key. If the license key entry screen
does not appear, go to step 3-3. To use the application as a trial, select [Trial] without
entering the license key.
3
Select [Yes].
IMPORTANT
• If you change the date/time while using the trial version of an application, you
will no longer be able to use the application.
• Icons of activated application are displayed in the Home screen.
Select the application icon in the Home screen.
Select the application icon.
The application will start up.
Login User Name
7000
8000
5-13
Login Password
7000
8000