Picture - Strong SRT 7009 User Manual

Digital hd satellite receiver
Table of Contents

Advertisement

3. To store the changes and exit the menu, press .
7.1.2 EPG (Electronic Programme Guide)
Please refer to section 6.8 above.
7.1.3 Sort
Here you can sort your channels in the following orders:
Default
By Encrypt
By Frequency
By Service Name
Recall List
Enable or disable the Recall list function, which supports multi-recall-channel switching. If the status is
set ON then a list of previously selected channels will be displayed for new selection by pressing the
9 button. If the status is set OFF then the receiver just will switch to the previously selected channel
by pressing the 9 button.

7.2 Picture

Press MENU, then select Picture. The menu provides options to adjust the video settings. Press p/q
to select an option and tu to adjust the setting. Press  to exit the menu.
Aspect Ratio
You can set the display format to available settings like 16:9 Widescreen, 16:9 Pillarbox, 4:3 Letterbox,
4:3 Pan&Scan.
16:9 Widescreen
16:9 Pillarbox
4:3 Letterbox
4:3 Pan&Scan
TIP
Resolution
If the video does not appear correctly, change the setting. These settings match the most common
settings for HDMI.
1. 480i:
2. 480p:
14
Sort the channels in the original order
Sort the channels from free to scrambled
Sort the channels in frequency order (Low-High)
Sort the channels in alphabetical order (A-Z)
For 16:9 TV screens. All programmes will fill the full screen. Content
formatted in 4:3 will be stretched.
For 16:9 TV screens. The unit will display all content in its original aspect ratio.
Programmes formatted in 4:3 will be presented with black bars on the left
and right.
For 4:3 TV screens. The unit will display all content in its original aspect ratio.
Programmes formatted in 16:9 will be presented with black bars on the top
and bottom.
For 4:3 TV screens.16:9 content will have the extreme left and right portions
cut off and presented full screen.
You can change the video output format directly from viewing mode by
pressing the YELLOW button on the remote control.
for NTSC system TV.
for NTSC system TV.

Advertisement

Table of Contents
loading

Table of Contents