Table of Contents
Advertisement
1
Introduction
1.1
About this manual
T
his instruction details the installation procedure for the Orion Chair used with the VisualEyes™ 515 and
VisualEyes™ 525 software version 3.0 and later. Orion Reclining Chair will hereafter be referred to as the
'Orion Chair'.
This product is manufactured by:
1.2
Environmental conditions
The chair is recommended for indoor use only.
Relative humidity:
•
Temperature storage:
•
Operating temperature:
•
•
Power supply:
Note: Please refer to the Instructions for Use for VisualEyes™ 515 and VisualEyes™ 525 software version
3.1 and later for EMC related information.
1.3
Markings
The following markings can be found on the instrument, accessories, or packaging:
Symbol
0123
D-0120794-D – 2023/04
Orion Reclining Chair Installation Instructions
Interacoustics A/S
Audiometer Allé 1
5500 Middelfart
Denmark
Tel.:
+45 6371 3555
E-mail:
info@interacoustics.com
Web:
www.interacoustics.com
30 to 80% (non-condensing)
32° to 125° F (0° to 52° C)
60° to 90° F (16° to 32° C)
110VAC, 220VAC step down to 110VAC through isolation
transformer
Explanation
An applied part that includes a patient connection that is intended to deliver
electrical energy or an electrophysiological signal to or from the patient shall
be a Type BF part. An EOG amplifier is considered a Type BF part.
An applied part that includes a patient connection which can be
disconnected from the patient immediately is a Type B part. The Aqua
Stim™ caloric irrigator is a Type B part.
Follow instructions for use
WEEE (EU-directive).
This symbol indicates that the product should not be discarded as unsorted
waste but must be sent to separate collection for facilities for recovery and
recycling.
The CE-mark indicates that the manufacturer meets the requirements of
Annex II of the Medical Device Directive 93/42/EEC for the quality system.
Page 1
Advertisement
Table of Contents
