Table of Contents
Advertisement
3.2.1.4 Install Orion Chair drivers
Step 1:
Follow the guide from Figure 11 Error! Reference source not found. to install the InstaCal software.
Figure 11: InstaCal installation process
Step 2:
Launch the InstaCal software, select the Orion Chair named USB-231 and click ok to register the device in
the program
Figure 12: InstaCal Board Detection
Step 3:
In InstaCal, click the fourth icon illustrating a gear in the top horizontal bar.
Figure 13: InstaCal Settings symbol
Step 4:
In the combo box choose Single Ended (8 ch) for the number of channels field and click OK, finish off by
exiting InstaCal.
Figure 14: InstaCal Board Configuration
D-0120794-D – 2023/06
Orion Reclining Chair Installation Instructions
Page 17
Advertisement
Table of Contents
