Unpacking And Inspection; Inspection Of Shipment; Unpacking Chair From The Crate - Interacoustics Micromedical Orion Installation Instructions Manual

Reclining chair

Table of Contents

2 Unpacking and inspection

Check for damage

Ensure that you have received all the components on the shipping checklist during unpackaging. All the

components should be checked visually for scratches and missing parts before use. All the contents of the

shipment must be checked for their mechanical and electrical functioning. If the equipment is found faulty,

please contact your local distributor immediately. Keep the shipping materials for the carrier's inspection and

insurance claim.

Keep carton for future shipment

The product comes with shipping cartons, which are specifically designed for the components. It is

recommended to keep the cartons for future shipments in case of any need for return or service.

Reporting and returning procedure

Any missing part or malfunction or any damaged components (due to shipment) should be reported

immediately to the supplier/local distributor along with the invoice, serial number, and a detailed report of the

issue. For any on-site service-related information, please contact your local distributor. If the system /

components are to be returned for service, please fill all the details related to product issues in the 'Return

Report', which is attached to this manual. It is very important that you describe all the known facts about the

issue in the return report, as this will help the engineer to understand and solve the problem to your satisfaction.

Your local distributor holds the responsibility for coordinating any service/return procedure and related

formalities.

Disposition of packaging materials

If wished to dispose the crates and pallets and materials used for shipment, those shall be recycled

according to the local requirements and possibilities.

Use a battery powered drill with Trox and Phillips bits to remove screws.

Start by removing the top plate of the crate, then the sides marked 1 ,2, 3, and lastly remove the side marked

4, see Figure 2.

Note that a ramp is attached inside chair crate on side with marking 4.

Figure 2: Chair in wooden case with markings

D-0120794-D – 2023/06

Orion Reclining Chair Installation Instructions

Page 8

Table of Contents

8530926