Dexter Laundry T-750 C4 Installation And Parts & Service Manual page 81

End of Cycle
At the end of the cool down, the computer board opens the upper run relay, which removes power from
the blower motor control relay (R1) and also removes power to the (R2) drive enable relay which deacti-
vates the variable frequency drive and motor. The motor light on the computer board should no longer be
illuminated. The drive motor and tumbler stops and the computer board display now flashes until the dryer
loading door is opened. Once the dryer loading door is opened to remove the clothing the display goes
back to vend price.
Anti-Wrinkle
Anti-Wrinkle is a feature that periodically rotates the dryers after a cycle is complete. If the door was
closed at the end of the cycle, and is left closed for 5 minutes, the enunciator will sound and the display
begins scrolling "ANTI WRINKLE". 5 seconds later, the dryer motor will turn on for 60 seconds and then
turn off. The gas valves will not be activated. The "ANTI WRINKLE" message will continue throughout the
time that the motor is turned on. The user can choose to enable or disable this feature. This feature will
continue to occur every 5 minutes until the door is opened or 5 anti-wrinkle cycles are exceeded.
81
Part # 8533-120-001 9/21