Dexter Laundry T-750 C4 Installation And Parts & Service Manual page 45

Control Menu:
The Control menu allows for the user to observe important technical information for the control and Vari-
able Frequency Drive system. No changes can be made at this menu. See below for detailed information on
each sub menu.
Figure 11, shown below, shows the sub menu options for Control:
CONTROL
Serial Number:
The serial number is the control serial number.
MAC Address:
The MAC Address is a unique identifier designated to the control by the manufacturer. It allows the control
to be recognized by network routers.
IP Address:
The IP Address is the identifier given to the control by a network system.
M Firmware:
The M Firmware is the Main Firmware currently loaded onto the control.
S Firmware:
The S Firmware is the Secondary Firmware currently loaded onto the control.
C Firmware:
The C Firmware is the Communications Firmware currently loaded onto the control.
Drive ID:
The Drive ID is the code that represents the size of the Variable Frequency Drive and parameters loaded
into it, corresponding with the washer model.
SERIAL_NUMBER
MAC_ADDRESS
IP_ADDRESS
M_FIRMWARE
S_FIRMWARE
C_FIRMWARE
DRIVE_ID
XXXXXXX
XXXXXXXXXXXX
XXX.XXX.XXX.XXX
XX.XX.XX
XX.XX.XX
XX.XX.XX
XXXXXXX
Part # 8533-120-001 9/21
45