Dexter Laundry T-750 C4 Installation And Parts & Service Manual page 57

8. "SHIFT HOURS": This feature allows the user to shift the time used by the control from the time
kept internally by the control. The control uses a Real Time Clock (RTC) to internally track
the time and date. The RTC continues operation even if the control loses external power.
The RTC is set for Central Standard Time and no daylight savings. Because the machine
may be located in another time zone, the user can choose to create an alternate
time & date that tracks in parallel to the RTC. When this alternate time is chosen,
or shifted from the RTC, the alternate time will be used to, for example, track error code
occurrences and set time-of-day pricing changes.
a. The hours in "SHIFT HOURS" can be set by using the "UP" or "DOWN" buttons to
change the number that is flashing. Once the desired hour shift is chosen,
press the "ENTER" button to move to the minutes. Once the hours and minute
shift are both chosen, the "ENTER" button must be held down for 3 seconds to
confirm that the complete shifted time is set.
9. "TIME": The control uses a Real Time Clock (RTC) to internally track the time and date. The RTC
continues operation even if the control loses external power. The RTC is set for Central
Standard Time and no daylight savings. However, if a problem occurs and the RTC time is
not accurate, it can be reset to the current time using this option.
a. The hours in "TIME" can be set by using the "UP" or "DOWN" buttons to change the
number that is flashing. Once the desired hour is chosen, press the "ENTER"
button to move to the minutes. Once the hours and minute are both chosen, the
"ENTER" button must be held down for 3 seconds to confirm that RTC is meant to
be reset to the complete entry.
10. "DATE": Similar to "TIME", if a problem occurs and the RTC date is not accurate, it can be reset
to the current date using this option.
a. The day of the month in "DATE" can be set by using the "UP" or "DOWN" buttons to
change the number that is flashing. Once the desired day of the month is
chosen, press the "ENTER" button to move to the month of the year. Once the de
sired month of the year is chosen, press the "ENTER" button to move to the
year. Once the day, month and year are all chosen, the "ENTER" button must be
held down for 3 seconds to confirm that RTC is meant to be reset to the complete
entry. To reset all values in the Settings options to factory default, press "ENTER"
when the "DEFAULT" prompt is shown. Press "ENTER" again when
the "RESET" prompt is shown to confirm the action.
Part # 8533-120-001 9/21
57