Dexter Laundry T-750 C4 Installation And Parts & Service Manual page 123

Maintenance Instructions -Electronic Acceptor (Original Design)
CENTER OF ROTATION
Rotate the spring clockwise for about 40 to 60
degrees until it becomes free of the protrusion.
Lift off the spring with the attached plastic part.
3. Assembly of a new spring
Attach the plastic part to the new spring.
into its proper position.
Place the plastic part in its position (slot).
Push the spring below the protrusion by means of
a small screw driver.
Push the spring lateral to the right until its snaps
Part # 8533-120-001 9/21
123