Dexter Laundry T-750 C4 Installation And Parts & Service Manual page 42

Sounds:
If the user programs the Sounds to "OFF", the control will not sound the enunciator at the end of a wash
cycle. The factory default is "ON".
Password:
If the user programs the Password to any value other then '0000", the control will prompt the user to
enter a password (the programmed value) before manual programming can be accessed. The factory
default is "0000" (no password).
Note that if the user forgets the Password, it can be reset to factory default (no password), by performing
a hard reset on the control. Please refer to the appropriate section of this manual to understand how to
perform a hard reset.
The individual digits of the Password can be set by using the "UP" or "DOWN" buttons to change the
number that is flashing. Once the desired number is chosen for a single digit, press the "ENTER" button
to move to the next one. Once all four desired digits are chosen, the "ENTER" button must be held down
for 3 seconds to confirm that the complete password should be set.
Language:
The control uses English for the default language of the customer prompts. Alternatively, the user can
choose Spanish, French, Malay, or Italian for the customer display prompts. However all other prompts
such as Manual Programming, USB Programming, and any Error Codes will still display in English.
Shift Hours:
The control uses a Real Time Clock (RTC) to internally track the time and date. The RTC continues opera-
tion even if the control loses external power. The RTC is set for Central Standard Time and no daylight
savings.
Because the machine may be located in another time zone, the user can choose to create an alternate
time & date that tracks in parallel to the RTC. When this alternate time is chosen, or shifted from the RTC,
the alternate time will be used to, for example, track error code occurrences and set time-of-day pricing
changes.
The hours in "SHIFT HOURS" can be set by using the "UP" or "DOWN" buttons to change the number
that is flashing. Once the desired hour shift is chosen, press the "ENTER" button to move to the minutes.
Once the hours and minute shift are both chosen, the "ENTER" button must be held down for 3 seconds
to confirm that the complete shifted time is set.
Time:
The control uses a Real Time Clock (RTC) to internally track the time and date. The RTC continues opera-
tion even if the control loses external power. The RTC is set for Central Standard Time and no daylight
savings. However, if a problem occurs and the RTC time is not accurate, it can be reset to the current
time using this option.
The hours in "TIME" can be set by using the "UP" or "DOWN" buttons to change the number that is flash-
ing. Once the desired hour is chosen, press the "ENTER" button to move to the minutes. Once the hours
and minute are both chosen, the "ENTER" button must be held down for 3 seconds to confirm that RTC is
meant to be reset to the complete entry.
42
Part # 8533-120-001 9/21