Ratings/Specifications - Omron Sti F3SJ-E N25 Series User Manual

Overview and Specifications

Ratings/Specifications

The model names of the F3SJ-E/B contain the 4 digits indicating the protective height (mm).
Item
Detection capability
Beam gap
Number of beams
Protective height
Lens diameter
Operating range
Response time
Startup waiting time
Power supply voltage (Vs)
Current consumption
Light source
Effective aperture angle (EAA)
Safety output (OSSD)
Auxiliary output
Output operation mode
Input voltage
Overvoltage category
Indicator
Mutual interference prevention function
Series connection function
Test function
Safety-related functions
F3SJ-E/B
6
User's Manual
Easy Type
Model
F3SJ-EN25
Opaque objects
25 mm diameter
20 mm
8 to 54
185 to 1,105 mm
5 mm
0.2 to 7 m
ON to OFF: 15 ms max. (Response time when used alone or in 2 or 3 connected)
OFF to ON: 70 ms max. (Response time when used alone or in 2 or 3 connected)
2 s max.
SELV/PELV 24 VDC±20% (ripple p-p 10% max.)
Refer to "Model/Current Consumption List" on page 9.
Infrared LED (870 nm wavelength)
Based on IEC 61496-2.
Within ±2.5° for both emitter and receiver at an operating range of 3 meters or more.
Two NPN transistor outputs, Load current: 200 mA max., Residual voltage: 2 V max.
(except for voltage drop due to cable extension), Leakage current: 1 mA max., Load
inductance: 2.2 H max. *1
Maximum capacitive load: 1 µF *2
–
Safety output: ON when receiving light
Test input:
ON voltage: 0 V to 3 V (short circuit current approx.
4.0 mA)
OFF voltage: 1/2 Vs to Vs, or open *3 (short circuit
current approx. 3.0 mA)
II (IEC 60664-1)
Refer to "Internal (LED) Indicator Display Pattern" on page 4.
Mutual interference prevention algorithm prevents interference in up to three sets.
–
Self-test (at power-on, and during operation)
External test (light emission stop function by test input)
–
Basic Type
F3SJ-BN25
8 to 102
185 to 2,065 mm
One NPN transistor output
Load current: 100 mA max.
Residual voltage: 2 V max.(except for voltage
drop due to cable extension)
Leakage current: 1 mA max.
Safety output: On when receiving light
Auxiliary output:
- Basic system
Reverse output of safety output
- Muting system
ON during muting/override
Test input, Interlock selection input, Reset input,
Muting input:
ON voltage: 0 V to 3 V (short circuit current approx.
4.0 mA)
OFF voltage: 1/2 Vs to Vs, or open *3 (short circuit
current approx. 3.0 mA)
External device monitoring input:
ON voltage: 0 V to 3 V (short circuit current approx.
5.5 mA)
OFF voltage: open
Number of connections: Up to three sets
Total number of beams: Up to 192
Maximum connection cable length: 7 m
(connection cable (F39-JBR2W) and F3SJ's
cable are not included)
Interlock (basic system)
External device monitoring (basic system)
Muting (muting system)
Override (muting system)