Omron Sti F3SJ-E N25 Series User Manual page 137

One-touch M6 Bracket, One-touch M8 Bracket
Appearance
Replacement Bracket
Appearance
Contact mount Bracket
Appearance
Control Unit
Appearance
Model Application
F39-LJB3-M6K Used for mounting
Intermediate Bracket
with one-touch
operation.
F39-LJB3-M8K
Model Application
F39-LJB4 Mounting bracket
that is used when
replacing existing
area sensors (F3SJ-
A or F3SN) with a
F3SJ-E/B.
Model Application
F39-LJB5 Bracket to closely
contact the back side
of the Sensor.
Model Output
G9SA-301-P Relay with three N.O.
and one N.C.
contacts
Appendix
Remarks
Comes with M6 hexagon socket low head
cap screws (M6 x 10).
Comes with M8 hexagon socket low head
cap screws (M8 x 14).
Remarks
Four brackets per set (two brackets for
emitter, two brackets for receiver)
Side mounting and backside mounting
possible
Remarks
2 for an emitter, 2 for a receiver, total of 4
per set
Remarks
• An F39-JDA single-ended cable is
required.
• An NPN type of F3SJ-E/B can be
connected.
F3SJ-E/B
User's Manual
E
121