Ratings And Specifications - Omron F3SG-SR/PG Manual

Ratings and Specifications

Safety Light Curtain F3SG-SR Series Main unit
The  in the model names indicate the protective heights in millimeters.
Model
Object resolution
(Detection capability)
Beam gap
Number of beams
Lens size
Protective height
Operating range
Performance
Response time
*1
Effective
aperture angle
(EAA)
(IEC 61496-2)
Light source
Startup waiting time
Power supply voltage (Vs)
Current consumption
Safety outputs (OSSD)
Electrical
Auxiliary output
Output operation
mode
F3SG-  SRA 
14
F3SG-  SRB 
14
Opaque objects
14-mm dia.
10 mm
15 to 199
4.4  3.4 mm (W  H)
160 to 2,000 mm
Long 0.3 to 10.0 m *
Short 0.3 to 3.0 m *
* When operating at an ambient temperature of -10 to -30°C, use the F3SG-SR with the operating range of 0.3 to 5.0 m in Long
Mode and 0.3 to 1.5 m in Short Mode.
Optical synchronization:
ON to 8 to 18 ms
OFF Wired synchronization:
10 to 21 ms
Normal
mode
Optical synchronization:
OFF to 40 to 90 ms
ON Wired synchronization:
50 to 105 ms
Optical synchronization:
ON to 16 to 36 ms
OFF Wired synchronization:
20 to 42 ms
×2 Slow
mode *2
Optical synchronization:
OFF to 80 to 180 ms
ON Wired synchronization:
100 to 210 ms
Optical synchronization:
ON to
32 to 72 ms
OFF Wired synchronization:
40 to 84 ms
×4 Slow
mode *2
Optical synchronization:
OFF to 160 to 360 ms
ON Wired synchronization:
200 to 420 ms
Optical synchronization:
ON to 64 to 144 ms
OFF Wired synchronization:
80 to 168 ms
×8 Slow
mode *2
Optical synchronization:
OFF to
320 to 720 ms
ON Wired synchronization:
400 to 840 ms
*1. Response time when used in one segment system.
Refer to page 24. Refer to the User's Manual for cascaded connection.
*2. Selectable by SD Manager 3.
Type 4 ±2.5° max. *
* Emitter and receiver at operating range of 3 m or greater.
Infrared LEDs, Wavelength: 870 nm
3 s max.
SELV/PELV 24 VDC±20% (ripple p-p 10% max.)
Refer to page 24
Two PNP or NPN transistor outputs (PNP or NPN is selectable by wiring of power supply.)
Load current: 300 mA max., Residual voltage: 2 V max. (except for voltage drop due to cable extension),
Capacitive load: 1 F max., Inductive load: 2.2 H max. *1*2*3
Leakage current: 1 mA max.(PNP), 2 mA max.(NPN) *4
*1. For the F3SG-
segment cascade.
*2. The residual voltage is 3 V max. when the Intelligent Tap is connected to the sensor.
*3. The load inductance is the maximum value when the safety output frequently repeats ON and OFF.
When you use the safety output at 4 Hz or less, the usable load inductance becomes larger.
*4. These values must be taken into consideration when connecting elements including a capacitive load
such as a capacitor.
One PNP or NPN transistor output (PNP or NPN is selectable by wiring of power supply.)
Load current: 100 mA max., Residual voltage: 2 V max. *
* The residual voltage is 3 V max. when the Intelligent Tap is connected to the sensor.
Safety output Light-ON (Safety outputs are turned to the ON state when the receiver receives an emitting signal.)
Auxiliary output Safety output (Inverted signal output: Enable) (default) (Configurable by SD Manager 3)
- F3SG-  SRA  - F3SG-
25
- F3SG-  SRB  - F3SG-
25
25-mm dia. 45-mm dia.
20 mm 40 mm
8 to 124 6 to 38
6.7  4.5 mm (W  H)
160 to 2,480 mm 240 to 1,520 mm
0.3 to 20.0 m
0.3 to 7.0 m
Optical synchronization:
8 to 13 ms Optical synchronization: 8 ms
Wired synchronization: Wired synchronization: 10 ms
10 to 17 ms
Optical synchronization:
40 to 65 ms Optical synchronization: 40 ms
Wired synchronization: Wired synchronization: 50 ms
50 to 85 ms
Optical synchronization:
16 to 26 ms Optical synchronization: 16 ms
Wired synchronization: Wired synchronization: 20 ms
20 to 34 ms
Optical synchronization:
80 to 130 ms Optical synchronization: 80 ms
Wired synchronization: Wired synchronization: 100 ms
100 to 170 ms
Optical synchronization:
32 to 52 ms Optical synchronization: 32 ms
Wired synchronization: Wired synchronization: 40 ms
40 to 68 ms
Optical synchronization:
160 to 260 ms Optical synchronization: 160 ms
Wired synchronization: Wired synchronization: 200 ms
200 to 340 ms
Optical synchronization:
64 to 104 ms Optical synchronization: 64 ms
Wired synchronization: Wired synchronization: 80 ms
80 to 136 ms
Optical synchronization:
320 to 520 ms Optical synchronization: 320 ms
Wired synchronization: Wired synchronization: 400 ms
400 to 680 ms
 SRA, the load current is 150 mA max. in 2-segment cascade and 80 mA max. in 3-
F3SG-SR/PG
 SRA  - F3SG-  SRA 
45 85
 SRB  - F3SG-  SRB 
45 85
85-mm dia.
80 mm
4 to 12
280 to 920 mm
-
-
18