Loading A Setup, Patch Or Custom Set - Hammond Skx PRO Reference Manual

Using Memory
694

Loading a Setup, Patch or Custom Set

1. From any of the PLAY Mode Pages, press the MENU/EXIT button. The Information Center
Display should look like this:
The "COMBINATION" box should be highlighted.
2. Press the PAGE " " button three times. The Information Center Display should now look like
this:
3. Press the ENTER button. The Information Center Display should now look similar to this:
4. Use the VALUE knob to select the media from which to Load. You can select either Internal
Memory (the instrument's internal memory) or USB Flash Drive. If you wish to Load a file
from a USB Flash Drive, make sure a USB Flash Drive is inserted in the TO FLASH DRIVE Port;
otherwise you will not be able to select USB Flash Drive using the VALUE knob.
HA<O>
SKX PRO Reference Guide