Hammond Skx PRO Reference Manual page 337

2. Use the VALUE knob to select the source Component (the Component you want to copy
from). You can select from 1 to 4.
3. After you have made your selection, press the DIRECTION " " button to highlight the
"Component 2" box.
4. Use the VALUE knob to select the target Component (the Component you want to copy to).
You can select from 1 to 4.
5. After you have made your selection, press the DIRECTION " " button to highlight the "COPY"
box.
6. Press the ENTER button. You will see the message "Copy Component..." flash in the display
for approximately 1 second.
NOTE: If you DO NOT wish to Initialize, press the MENU/EXIT or PLAY button instead of the
ENTER button.
PIANO / ENSEMBLE Voice Sections
HA<O>
SKX PRO Reference Guide
317