Hammond Skx PRO Reference Manual page 135

9. When you have finished the Naming procedure, press the ENTER button to complete the
Recording procedure. You will see the following messages flash in the display for
approximately 1 second each:
NOTE: Do not turn the power "OFF" while the above messages are displaying.
After the "Completed" message disappears, you will see the Number of the Patch you are
working with change from Fnnn to Unnn. This indicates that a User Patch is now active. If
you Rename a Patch, the new Name will display to the right of the Patch Number.
NOTE: If you DO NOT wish to Record, press the MENU/EXIT or PLAY button instead of the
ENTER button.
10. Press the PLAY button to return to the PLAY Mode.
Patches
HA<O>
SKX PRO Reference Guide
115