Hammond Skx PRO Reference Manual page 120

Combinations
100
4. Press the ENTER button. The Information Center Display will look similar to this:
This is the screen you will use to Name your User settings. For this example, leave the Name
shown as it is. Naming Combinations, Patches, etc. will be covered later in this Guide.
5. Press the ENTER button to complete the Recording procedure. You will see the following
messages flash in the display for approximately 1 second each:
After the "Completed" message disappears, you will see the Combination Number at the top
of the screen change to U001. This indicates that a User Combination is now active. If you
Rename a Combination, the new Name will display to the right of the Combination Number.
NOTE: After you have created and Recorded a User Combination, you can assign it to a
FAVORITE for quick access. More information can be found starting on page 129.
NOTE: When the SKX PRO is first turned "ON" and the operating system finishes loading,
Combination F001 is automatically assigned as the default Combination. If you change
Combination F001 and Record it to U001, it will be remembered unless you perform a DEFAULT
ALL operation to restore the factory settings. For more information, please consult the SPECIAL
UTILITY FEATURES chapter of this Guide starting on page 661.
HA<O>
SKX PRO Reference Guide