Hammond Skx PRO Reference Manual page 137

4. After doing the previous steps, press the red RECORD button located to the right of the
display. You will see the following message in the display:
Notice that the box underneath "CONTENTS" is highlighted.
You can now use the VALUE knob to decide what you want to Record. For this example, leave
this Parameter set for "Combination Patch," since you are Recording a User Combination.
5. From the above screen, use the DIRECTION " " button to move the cursor to the box
underneath "TO."
You can now use the VALUE knob to select the User Number which will contain your User
Combination. For this example, leave the value set at U001.
6. From the above screen, use the DIRECTION " " button to move the cursor to the RECORD
box.
Patches
HA<O>
SKX PRO Reference Guide
117