Hammond Skx PRO Reference Manual page 115

4. From the screen shown at the bottom of the previous page, turn the VALUE knob until F064
shows on the top line of the Information Center Display:
Notice the ENSEMBLE ALLOCATE button has turned "OFF" and the SYNTH button has turned
"ON." Only the MONO SYNTH Patch will now sound from the UPPER Keyboard.
5. From the above screen, turn the VALUE knob to the left until F010 shows on the top line of
the Information Center Display:
Notice the SYNTH line is "greyed out." Notice also that the SYNTH ALLOCATE button is
"OFF." This indicates that the MONO SYNTH Voice Section will not play if this Combination
is selected. However, you can press the SYNTH ALLOCATE button to turn it "ON," and the
SYNTH line will change from grey to white. You can now play the MONO SYNTH Section.
Combinations
HA<O>
SKX PRO Reference Guide
95