Hammond Skx PRO Reference Manual page 711

6. Use the DIRECTION " " button to move the cursor to CONTENT and use the VALUE knob
to select the type of content to Save.
The data chart below shows the options you can select.
Content
Setup
Organ Patch
Piano/Ensemble Patch User Patch in the PIANO / ENSEMBLE Voice Sections
Synth Patch
Tone Wheel
Pipe
Turn the VALUE knob to make your selection.
7. Use the DIRECTION " " button to move the cursor to the next box down. It may say PATCH
or CUSTOM depending on the type of file you are Saving.
NOTE: The number of boxes below the "CONTENTS" box will be different depending on the type
of file being Saved. Setup will display only the TO box (the file destination). Organ Patch,
Piano/Ensemble Patch, Synth Patch and Pipe will display two boxes - the Patch or Custom
Number to be Saved and the TO box. Tone Wheel will have an additional box, DB TYPE, which
will allow you to select which Drawbar Organ Type to Save the Custom Tone Wheel to. For more
information consult the CUSTOM SETS chapter of this Guide.
NOTE: Because the Setup option will have only the TO box, if you are Saving a Setup, skip Step 7.
SAVE Content Options
Description
Setup file.
User Patch in the ORGAN Voice Section.
User Patch in the MONO SYNTH Voice Section
Custom Tone Wheel
Custom Pipe
Using Memory
HA<O>
SKX PRO Reference Guide
691