Hammond Skx PRO Reference Manual page 139

8. Press the ENTER button to complete the Recording procedure. You will see the following
messages flash in the display for approximately 1 second each:
NOTE: Do not turn the power "OFF" while the above messages are displaying.
After the "Completed" message disappears, you will see the Combination Number at the top
of the screen change to Uxxx. This indicates that a User Combination is now active. If you
Rename a Combination, the new Name will display to the right of the Combination Number.
NOTE: If you DO NOT wish to Record, press the MENU/EXIT or PLAY button instead of the
ENTER button.
9. Press the PLAY button to return to the PLAY Mode. The Combination will show in the display
as "Uxxx" followed by the Name.
NOTE: After you have created and Recorded a User Combination, you can assign it to a
FAVORITE for quick access. More information can be found starting on page 129.
Patches
HA<O>
SKX PRO Reference Guide
119