Hammond Skx PRO Reference Manual page 580

Special Performance Features
560
5. While continuing to hold the TRANSPOSE button, press the DOWN button once. The
Information Center Display should show the following:
Notice the message at the upper right of the display (-1). You have now transposed the entire
instrument down one half-step - when you depress a "C" note you will hear the note "B"
below it.
6. To return the instrument to concert pitch, Press and Hold the TRANSPOSE button and press
the UP button until the message at the upper right of the display disappears.
NOTE: You can also transpose the entire instrument by using the MASTER TRANSPOSE feature in the
SOUND FUNCTION Mode. This is explained in the SPECIAL UTILITY FEATURES chapter of this Guide
starting on page 641.
NOTE: If you Save a Setup with the instrument transposed using the MASTER TRANSPOSE, the
transposition setting will be Recorded. If you Load the Setup to the instrument, the transposition setting
will load along with the rest of the information contained in the Setup. For more information about Setups,
please consult the USING MEMORY chapter of this Guide starting on page 689.
HA<O>
SKX PRO Reference Guide