Hammond Skx PRO Reference Manual page 129

5. When you have completed your edits, press the red RECORD button. The Information Center
Display will look similar to this:
If "Combination Patch" is shown in the box under CONTENTS, you will need to use the
VALUE knob to select the Voice Section to which to Record the Patch. The data chart below
shows the options you can select.
Parameter
Bundle Record Combination Parameters, ORGAN Patches and SYNTH Patches.
Combination Patch Record Voice Sections and Combination Parameters to a Combination.
Organ Patch Record ORGAN Parameters to an ORGAN Patch.
Piano Patch Record PIANO Parameters to a PIANO Patch.
Ensemble Patch Record ENSEMBLE Parameters to an ENSEMBLE Patch.
Synth Patch Record MONO SYNTH Parameters to a SYNTH Patch.
Bundles and Combinations contain multiple Parameters from different Voice Groups. To
Record a Patch for one of the Voice Groups, use the VALUE knob to select ORGAN, PIANO,
ENSEMBLE or SYNTH Patches.
6. When you have made your selection, use the DIRECTION " " button to move the cursor to
the box underneath "TO."
NOTE: For this example, "Organ Patch" is shown.
You can now use the VALUE knob to select the User Number which will contain your User
Patch.
NOTE: A User Patch Number which has not been previously Recorded will display Empty. This
is a safeguard against overwriting a previous Recorded Patch accidentally.
RECORD CONTENTS
Description
Patches
HA<O>
SKX PRO Reference Guide
109