Hammond Skx PRO Reference Manual page 117

3. From the screen shown at the bottom of the previous page, press the ENSEMBLE ALLOCATE
button. The Information Center Display will now look like this:
Notice the PIANO ALLOCATE button is now "OFF." The ENSEMBLE Patch will now sound.
Notice also the small letter E at the top is still displaying, indicating the Combination has been
changed from its factory setting.
4. From the above screen, press the SYNTH ALLOCATE button. The Information Center Display
will now look like this:
Notice the ENSEMBLE ALLOCATE button is now "OFF." The MONO SYNTH Patch will now
sound.
5. Now press the ORGAN ALLOCATE button "ON." The Information Center Display will now
look like this:
You have now returned to the settings recorded in the Combination. The small E on the top
line of the screen is now "OFF."
NOTE: The ALLOCATE buttons are normally "cross-canceling," meaning if one is turn "ON" the
others will turn "OFF." However, the ALLOCATE buttons can be made "additive" - if one is turned
"ON" any others also "ON" will remain "ON." For more information, please consult the
ALLOCATING VOICE SECTIONS chapter of this Guide starting on page ? or the SPECIAL
PERFORMANCE FEATURES chapter starting on page 586.
Combinations
HA<O>
SKX PRO Reference Guide
97