Hammond Skx PRO Reference Manual page 148

Bundles
128
8. Press the ENTER button to complete the Recording procedure. You will see the following
messages flash in the display for approximately 1 second each:
NOTE: Do not turn the power "OFF" while the above messages are displaying.
After the "Completed" message disappears, you will see the Bundle Number at the top of the
screen change to B001. This indicates that a Bundle is now active. If you Rename a Bundle,
the new Name will display to the right of the Bundle Number.
You will also notice the ORGAN and MONO SYNTH Voice Numbers and Names will display
the Bundle Name and Number. This is because the ORGAN and MONO SYNTH Parameters
are Recorded as a Bundle.
NOTE: If you DO NOT wish to Record, press the MENU/EXIT or PLAY button instead of the
ENTER button.
9. Press the PLAY button to return to the PLAY Mode. The Bundle will show in the display as
"Bxxx" followed by the Name. You can now use the Bundle "as is" or include it in a
Combination if you want also to include PIANO and/or ENSEMBLE settings as part of the total
registration.
NOTE: See page 99 for more information on how to Record a Combination.
HA<O>
SKX PRO Reference Guide